AQMD Projects - Year 2009

The following AQMD Projects have been determined subject to CEQA and thus the following documents have been prepared.  The dates in the parentheses are either the closing date for comments on the draft CEQA document or the AQMD Governing Board Meeting Public Hearing Date when the final CEQA document was certified. Please note, if a project was determined to be exempt from CEQA, a Notice of Exemption (NOE) may be issued.  The NOEs can be found under "Public Notices" in this website.

Please Review this Disclaimer Before Accessing the Documents

• Final Environmental Assessment for PAR 1112.1 - Emissions of Particulate Matter and Carbon Monoxide from Cement Kilns (certified December 4, 2009)(PDF, 395k)

• Final Environmental Assessment for Proposed Amended Rule 1145 - Plastic, Rubber, Leather and Glass Coatings (certified December 4, 2009) (PDF, 570k)

• Final Environmental Assessment for Proposed Rule 1155 - Particulate Matter (PM) Control Devices (certified December 4, 2009) (PDF, 639k)

• Final Environmental Assessment for Proposed Amended Rule 1111 – NOx Emissions from Natural-Gas-Fired, Fan-Type Central Furnaces (certified November 6, 2009) (PDF, 293k)

• Final Environmental Assessment for Proposed Amended Rule 102 - Definitions of Terms (certified September 11, 2009) (PDF, 1.7MB)

• Final Environmental Assessment for Proposed Amended Rule 1401– New Source Review of Toxic Air Contaminants; and Impact Assessment for Facilities Subject to Rule 1402 – Control of Toxic Air Contaminants from Existing Sources (certified June 5, 2009) (PDF, 337k)

• Final Subsequent Environmental Assessment for Proposed Amended Rules 1171 - Solvent Cleaning Operations and 1122 - Solvent Degreasers (certified May 1, 2009) (PDF, 493)

  • Findings and Statement of Overriding Considerations (PDF, 61k)

• Final Environmental Assessment for Proposed Rule 1143 - Consumer Paint Thinners and Multi-Purpose Solvents (certified March 6, 2009) (PDF, 5.3MB)

• Final Environmental Assessment for Proposed Rule 1144 – Vanishing Oils and Rust Inhibitors (certified March 6, 2009) (PDF, 534k)

• Final Previously Certified Environmental Assessment for Proposed Amended Rule 1156 - Further Reduction of Particulate Emissions from Cement Manufacturing Facilities (re-certified March 6, 2009) (DOC, 3.3MB)

  • Final Initial Study (PDF, 536k)

• Final Program Environmental Assessment for Proposed Rule 2702 - Greenhouse Gas Reduction Program (certified February 6, 2009) (PDF, 3.2MB)

Archive of CEQA Documents for AQMD Rule Projects:

Year 2008

Year 2007

Year 2006

Year 2005

Year 2004

Year 2003

Year 2002

Year 2001

Year 2000

Return to the Top of Page